Set up in 60 seconds.

Run through these in order: the power switch is ON and glowing red, the connector cable is fully seated in the locking panel, your audio source is playing with the volume up, and you’re connected on the right input (Bluetooth or AUX). Nine times out of ten it’s a loose connector or a muted source.

Make sure the unit is powered on, then turn your device’s Bluetooth off and back on and select “SoundBlanket” from the list. Still stuck? Power the unit off and on, move your device closer, and try again. If SoundBlanket shows as already paired but won’t connect, tap “forget device” and pair fresh.

Whatever feels comfortable. Start low and raise it slowly until you feel the sound the way you like. Avoid pushing your source to maximum, since overdriving the input can distort the audio and damage the speakers over time.

There’s no dedicated vibrate setting, but you can absolutely achieve it. Play a low-frequency tone or use a frequency generator app (plenty of free ones) and you can fine-tune the vibration on its own, from a soft hum to a deeper pulse.

Anything you want: music, guided meditations, white noise, rain, movies, gaming. There’s no app and no required content. Bass-heavy and low-frequency audio creates the strongest sensation, while softer ambient tracks feel gentler.

Yes. The amplifier has Bluetooth, a 3.5mm audio input, and a 3.5mm audio output. Pair over Bluetooth from any device that supports it, or run a standard 3.5mm cable from your device into the amp’s “IN” input. If it plays audio, it works with SoundBlanket. No subscriptions, no apps required.

Yes. Connect headphones to the amplifier’s 3.5mm output if you want complete isolation: sound in your ears and through your body, with nothing out loud in the room.

The standard Amplifier powers a single SoundBlanket. The Double Amplifier powers a SoundBlanket and a Pillow at the same time, ideal for the most immersive experience.

The ground plug from the provided IEC cable connects to the silver-embedded inner liner and the silver-embedded Pro duvet cover through silver-embedded velcro. That creates continuity to earth the moment you touch the SoundBlanket. Your body completes the circuit through skin contact. No active power is involved in the grounding function.

Yes. The grounding system uses only the earth ground from your power outlet. No active electrical current passes through the blanket. It’s the same principle as walking barefoot on the ground, delivered through conductive silver fibers. The IEC cable’s ground connection is isolated from the live and neutral lines.

Yes. SoundBlanket is designed for all-day and all-night use with no time limit. Lay under it or on top of it and immerse yourself. The speakers built into the fabric translate audio into a gentle, full-body sensation you feel across the blanket’s entire surface. Non-invasive and non-habit-forming.

Only the outer duvet cover is washable. Untie the inner corner ties, remove the cover, and wash the cover only. Full instructions for both models are on the care page.